HP DeskJet F4580 Ink

How do I change the ink in my HP Deskjet F4580?

1. Push the printer’s Power button on, if it isn’t turned on yet.
2. Open the cartridge access panel – the carriage should move to the printer’s center. Wait until the machine is silent and idle before proceeding.
3. Gently press the cartridge down to release it and remove it out of the slot.
4. Unpack the new cartridge – don’t touch the ink cartridge’s black plastic.
5. Pull out the colored tab and get rid of the plastic tape.
6. Hold the cartridge along the sides with the nozzles facing the printer, then insert it into the slot at a slightly upward angle. Ensure that the cartridge’s icon matches the slot’s icon. The black cartridge goes to the right-side slots while the tri-color cartridges go into the left-side slots.
7. Carefully push the cartridge until it locks into place.
8. Repeat steps 4-7 with the other cartridges as necessary.
9. Close the cartridge access panel.

Recommended Cartridges for  HP DeskJet F4580 Printer:

60, 60XL, CC641WN, CC644WN

Frequently Asked question for HP Deskjet F4580 Ink Refill

a. What ink does HP Deskjet F4580 use?

The HP Deskjet F4580 uses 60 / 60XL Black and Tri-color ink cartridges. 

b. Why my HP DeskJet F4580 doesn't recognize my ink?

The HP printer contains a chip that recognizes and stores into memory the original cartridge that was installed. Thus, when you install your new cartridge, the printer doesn’t recognize the device because it still recognizes the old cartridge.

An easy solution:

1. Unplug the printer’s power cord.
2. After a few seconds, reconnect the power cord
3. Once the lights start flashing, press handhold and maintain the ON/RESUME and PAPER SIZE buttons.
4. Release the buttons If only the ON/RESUME light is flashing.