Canon MX922 Ink Cartridges

HOW DO I CHANGE THE INK IN MY CANON MX922?

1. Kindly turn on your Canon Pixma MX922 printer
2. Gently lift the printer’s Top Cover, followed by the Ink Cover. The Print Head repositions for cartridge replacement.
3. Push the tab at the front of the Empty Ink Cartridge to release it and then lift the tank out from its slot.
4. Take out the New Ink Cartridge from its packaging, plastic sheet and Orange cap.
5. Insert the front end of the Ink Cartridge into the empty slot at a slanting position. Press the Ink Cartridge down until it locks into place. 
6. Repeat the same steps for each other ink cartridge colors.
7. Gently close the Ink Cover, followed by the Top Cover, and wait for your printer to initialize.

See Infographic ↓

Compatible Cartridges for Canon Pixma MX922 Ink Replacement:

Canon 250, 251, CLI-251BKXL, CLI-251CXL, CLI-251MXL, CLI-251YXL, PGI-250BKXL Ink Cartridge

FAQ & GUIDE FOR CANON MX922 PRINTER INK & PRINTER COMPATIBLE CARTRIDGES

a. What ink does Canon MX922 use?

The Canon Pixma MX922 printer uses a PGI-250 black ink cartridge and CLI-251 Black, Gray, Cyan, Magenta, and Yellow ink cartridges. Both printer cartridges are available in high yield XL options. High yield Canon PGI-250XL & CLI-251XL ink cartridges print more pages per tank. There's also an extra high yield Canon PGI-255 XXL Black ink cartridge with an even higher page output. 

b. How to reset a Canon Pixma MX922 Ink Cartridge

1. Turn off your Canon Pixma MX922 printer and unplug its Power cord.
2. Press the Power button while plugging the Power cord back. The printer resets to Factory Default Settings. 
3. Press the Right Arrow button repeatedly until a “Shipping Mode 3” message appears on the screen.
4. Tap the OK button, and a “Without Cleaning” message appears. 
5. Open the Top Cover, and the Ink Cartridges moves towards the left. Wait for them to stop before you continue.
6. Turn off your printer and unplug its Power cord. Remove the Canon MX922 Ink Cartridges and then close the cover.
7. Plug back the Power cord and then press the Power button to turn on the printer. Wait for 2 – 3 minutes for the Canon MX922 to recognize the ink cartridges.

See Infographic ↓

c. How to remove a Canon MX922 Printhead

1. Turn on your Canon Pixma MX922 printer. Pull out the Paper Output Tray using the side handles.
2. Raise the Document Cover and then open the Printer Ink Cartridge Cover. The Printhead moves towards the proper removal position. Wait for it to stop  before you proceed.
3. Remove a Printer Ink Cartridge by pushing its front tab to release the cartridge and then lifting it out from the holder. Follow the same steps to remove the other ink cartridges.
4. Long-press the Stop button, and the Carriage moves towards the proper ink cartridge replacement position. Release the Stop button once it stops.
5. Open the Inner Cover and move it towards the bottom.
6. Pull out the Carriage Tray. Grab the top of it's Center Tab with your fingertips and then remove the Printhead from the printer.

d. How to install a Canon MX922 Printhead

1. Prepare the replacement Printhead product for your Canon Pixma MX922 printer.
2. Hold the Center Tab with its front side facing down. 
3. Install the Printhead into the holder. The two tabs on its front bottom corners must insert into the rails on the sides of the holder.
4. Push the Head Set Lever towards the back of the printer. Close the Inner Cover and install the Canon Pixma MX922 Ink Cartridges.
5. Close the Cover, followed by the Document Cover.

See Infographic ↓

e. How to check Canon Pixma MX922 Ink Levels

Follow the steps below to check Canon Pixma MX922 ink levels from a Windows PC or Mac Computer. There’s also a manual check option that you can use directly from your printer.

For Windows PC:

1. Search for and launch “Devices and Printers” from Windows.
2.  Locate your Canon MX922 product, right-click on its printer icon, and then select Printing Preferences.
3. Run the Canon IJ Status. Click on View Printer Status and then select Ink Details. 
4. Your PC displays the current Canon MX922 Printer Ink Levels. A notification icon will appear above the Ink Details dialogue box if there's an issue with an ink tank.

For MAC Computer:

1. Go to System Preferences and select Printers and Scanners.
2. Click on Canon MX922 from the left pane. Select Supply Levels, and your computer displays the current Canon Pixma MX922 Printer Ink Levels.

 Manual Check:

1. Turn on your Canon Pixma MX922 and then open its Top Cover. 
2. Wait for the Ink Cartridges to move towards the proper access position.
3. Open the Cartridge Case and then remove it from the Canon MX922.
4. The majority of Canon ink tanks feature a transparent plastic construction, allowing you to see right through their ink levels.

See Infographic↓