Canon PGI-225 & CLI-226 Ink Cartridge, Compatible High Yield – 15-Pack (3 Black, 3 Pigment Black, 3 Cyan, 3 Magenta, 3 Yellow)
Black: 340, Color: 510
225, 226, CLI-226BK, CLI-226C, CLI-226M, CLI-226Y, PGI-225BK
Avg. Price Per Cartridge: $2.45 each
Canon PGI-225 Black Compatible Printer Ink Cartridge
Black: 340
225, PGI-225BK
Avg. Price Per Cartridge: $7.28 each
Canon CLI-226 Grey Compatible Printer Ink Cartridge
Color: 510
226, CLI-226GY
Avg. Price Per Cartridge: $8.50 each
Canon CLI-226 Magenta Compatible Printer Ink Cartridge
Color: 510
226, CLI-226M
Avg. Price Per Cartridge: $8.50 each
Canon CLI-226 Cyan Compatible Printer Ink Cartridge
Color: 510
226, CLI-226C
Avg. Price Per Cartridge: $8.50 each
Canon PGI-225XL & CLI-226XL Ink Cartridge, Compatible High Yield – 5-Pack (1 Black, 1 Small Black, 1 Cyan, 1 Magenta, 1 Yellow)
Black: 340, Color: 510
225, 226, CLI-226C, CLI-226M, CLI-226Y, PGI-225BK
Avg. Price Per Cartridge: $4.65 each
Canon CLI-226 Yellow Compatible Printer Ink Cartridge
Color: 510
226, CLI-226Y
Avg. Price Per Cartridge: $8.50 each
Canon CLI-226 Black Compatible Printer Ink Cartridge
Color: 510
226, CLI-226BK
Avg. Price Per Cartridge: $8.50 each
How to Change your Canon PIXMA MX892 Ink Cartridges Refill
- Make sure the Canon MX892 printer's power is turned on, by pressing the Power button.
- Gently open the scanning unit cover by lifting it with the unit support. Let the print head holder change its place to the replacement position before you proceed.
- Remove the cartridge with the lamp flashing by pushing the front tab and lifting the device out of the carriage. Avoid contact with the printer's headlock lever.
- Prepare the new Canon MX892 Ink Cartridge by unpacking it, and removing the orange tape completely. Remove also the device's protective film.
- Hold the cartridge with the orange protective cap pointing upwards while avoiding contact with the air hole and carefully twist it 90 degrees horizontally to snap it off.
- Insert the new ink cartridge into the vacant slot and push the device into the matching slot.
- Close the printer’s scanning unit cover to complete the installation.