Canon PGI-225 & CLI-226 Ink Cartridge, Compatible High Yield – 15-Pack (3 Black, 3 Pigment Black, 3 Cyan, 3 Magenta, 3 Yellow)
Black: 340, Color: 510
225, 226, CLI-226BK, CLI-226C, CLI-226M, CLI-226Y, PGI-225BK
Avg. Price Per Cartridge: $2.45 each
Canon PGI-225 Black Compatible Printer Ink Cartridge
Black: 340
225, PGI-225BK
Avg. Price Per Cartridge: $7.28 each
Canon CLI-226 Grey Compatible Printer Ink Cartridge
Color: 510
226, CLI-226GY
Avg. Price Per Cartridge: $8.50 each
Canon CLI-226 Magenta Compatible Printer Ink Cartridge
Color: 510
226, CLI-226M
Avg. Price Per Cartridge: $8.50 each
Canon CLI-226 Cyan Compatible Printer Ink Cartridge
Color: 510
226, CLI-226C
Avg. Price Per Cartridge: $8.50 each
Canon PGI-225XL & CLI-226XL Ink Cartridge, Compatible High Yield – 5-Pack (1 Black, 1 Small Black, 1 Cyan, 1 Magenta, 1 Yellow)
Black: 340, Color: 510
225, 226, CLI-226C, CLI-226M, CLI-226Y, PGI-225BK
Avg. Price Per Cartridge: $4.65 each
Canon CLI-226 Yellow Compatible Printer Ink Cartridge
Color: 510
226, CLI-226Y
Avg. Price Per Cartridge: $8.50 each
Canon CLI-226 Black Compatible Printer Ink Cartridge
Color: 510
226, CLI-226BK
Avg. Price Per Cartridge: $8.50 each
How to Change your Canon Pixma MG6220 Ink Cartridges Refill
- Make sure the Canon MG6220 is turned on, then gently open the paper output tray by pressing its tiny release button.
- Lift the machine’s cover until it maintains the open position, then let the print head holder move to the replacement position.
- Remove the cartridge with the lamp flashing by pushing the tab and gently lifting the device. Be careful not to touch the print head lock lever.
- Prepare the new Canon MG6220 ink cartridge by taking it from its package, then getting rid of the orange tape altogether. Also, remove the protective film.
- Hold the Canon 6220 ink cartridge with the orange protective cap, pointing it up, and be careful not to block the L-shape air hole. Then, gently twist the orange cap horizontally at 90 degrees to snap it off.
- Install the new cartridge. Insert the cartridge’s front end into the print head at a slanting position and make sure it matches the label on the slot. Then, push the device into the slot until it clicks into position. Make sure the ink lamp lights red.
- Gently close the machine’s scanning unit or cover to finish the installation.