Brother TN660 Toner Black Compatible Cartridge, High Yield – 2-Pack
Black: 2600
630, 660, TN630, TN660
Avg. Price Per Cartridge: $22.10 each
Brother DR630 Compatible Black Drum Unit, High Yield
Drum: 12000
630, DR630
Avg. Price Per Cartridge: $47.88 each
Brother TN660 Toner High Yield Compatible Black Cartridge
Black: 2600
630, 660, TN630, TN660
Avg. Price Per Cartridge: $24.50 each
Brother TN630 Black Compatible Toner Cartridge
TN630
Avg. Price Per Cartridge: $20.81 each
How to Change Your Brother MFC-L2685DW Toner Cartridges
- Tap the Power button to turn on your Brother MFC-L2685DW and then pull out its Front Cover to open the Cartridge and Drum Area.
- Take out the Empty Toner Cartridge and Drum Unit Assembly from the printer
- Slide down the Green Lock Lever and remove the Toner Cartridge from the Drum Unit
- Prepare the New Toner Cartridge. Shake it from left to right 4-5 times before removing it from its package to uniformly distribute the toner inside.
- Remove the New Toner Cartridge’s Protective Covering and then insert the Cartridge into the Drum Unit until it locks into place. The Green Lock Lever on the Drum will lift instantly once you install it properly.
- Slowly slide the Green Tab from side to side for 3 - 4 times to clean the Corona Wire inside.
- Insert the Toner Cartridge and Drum Unit Assembly in the correct slot in the printer.
- Push the cover back into place to close the printer.
Recommended Cartridges for Brother MFC-L2685DW Toner:
630, 660, TN630, TN660
Frequently Asked Questions for Brother MFC L2685DW Toner Refill
-
What kind of toner cartridge does Brother MFC-L2685DW use?
The Brother MFC-L2685DW printer uses TN630 / TN660 Toner Cartridges just like Yoyoink’s Brother TN660 Toner Black Compatible Cartridge (High Yield) which can print up to 2,600 pages. Yoyoink also has a Compatible Brother DR630 Drum Unit Black that can print 12,000 pages. Also check out the Compatible Black Brother TN630 Toner Cartridge as all our Brother toner cartridge replacements are a cost-effective substitute for the standard models.