Brother HL-L9200CDWT Toner

How to Change your Brother HL L9200CDWT Toner Cartridges Refill

1. Make sure the Brother HL L9200CDWT printer is switched on by pressing the Power Button.
2. Pull out the empty toner cartridge. The cartridge assembly will easily surface out since there aren’t any latches to unlock.
3. Take the drum unit and toner cartridge assembly for the color indicated in the printer’s display by pulling its center handle.
4. Press the green latch to unlock the toner and remove it from the drum unit.
5. Unpack the new L9200CDWT Toner cartridge. Hold the cartridge and gently rock it sideways numerous times to evenly spread the toner inside, then pull off its protective cover.
6. Slide in the green slider over the drum assembly several times to clean the Corona Wire and don’t forget to return it to its locked position once you're done.
7. Slide in the drum unit with the new toner cartridge back into the printer.
8. Close the Brother L9200CDW printer’s top cover to complete the installation.