Brother HL-L2360DW Toner

How to Change Your Brother HL-L2360DW Toner Cartridges

1. Tap the Power button to turn on your Brother HL-L2360DW and then pull out its Front Cover to open the Cartridge and Drum Area.

2. Take out the Empty Toner Cartridge and Drum Unit Assembly from the printer
   
   
3. Slide down the Green Lock Lever and remove the Toner Cartridge from the Drum Unit
   
   
4. Prepare the New Toner Cartridge. Shake it from left to right 4-5 times before removing it from its package to uniformly distribute the toner inside.
   
   
5. Remove the New Toner Cartridge’s Protective Covering and then insert the Cartridge into the Drum Unit until it locks into place. The Green Lock Lever on the Drum will lift instantly once you install it properly.
   
   
6. Slowly slide the Green Tab from side to side for 3 - 4 times to clean the Corona Wire inside.
   
   
7. Insert the Toner Cartridge and Drum Unit Assembly in the correct slot in the printer.
   
   
8. Push the cover back into place to close the printer.
   
   

Recommended Cartridges for Brother HL-L2360DW Toner:
630, 660, TN630, TN660

Frequently Asked Questions for Brother HL-L2360DW Toner Refill

1. What kind of toner cartridge does Brother HL-L2360DW use?

   The Brother HL-L2360DW printer uses TN630 / TN660 Toner Cartridges which can print up to 1,200 pages. Yoyoink’s Brother DR630 Compatible Printer Black Drum Unit has a page yield of 12,000 pages.